Organizational Unit:
College of Design
College of Design
Permanent Link
Research Organization Registry ID
Description
Previous Names
Parent Organization
Parent Organization
Includes Organization(s)
Organizational Unit
Organizational Unit
Organizational Unit
Organizational Unit
Organizational Unit
ArchiveSpace Name Record
Publication Search Results
Now showing
1 - 3 of 3
-
ItemGeneralizable surrogate models for the improved early-stage exploration of structural design alternatives in building construction(Georgia Institute of Technology, 2016-01-15) Nourbakhsh, MehdiThe optimization of complex structures is extremely time consuming. To obtain their optimization results, researchers often wait for several hours and even days. Then, if they have to make a slight change in their input parameters, they must run their optimization problem again. This iterative process of defining a problem and finding a set of optimized solutions may take several days and sometimes several weeks. Therefore, to reduce optimization time, researchers have developed various approximation-based models that predict the results of time-consuming analysis. These simple analytical models, known as “meta- or surrogate models,” are based on data available from limited analysis runs. These “models of the model” seek to approximate computation-intensive functions within a considerably shorter time than expensive simulation codes that require significant computing power. One of the limitations of metamodels (or interchangeably surrogate models) developed for the structural approximation of trusses and space frames is lack of generalizability. Since such metamodels are exclusively designed for a specific structure, they can predict the performance of only the structures for which they are designed. For instance, if a metamodel is designed for a ten-bar truss, it cannot predict the analysis results of another ten-bar truss with different boundary conditions. In addition, they cannot be re-used if the topology of a structure changes (e.g., from a ten-bar truss to a 12-bar truss). If designers change the topology, they must generate new sample data and re-train their model. Therefore, the predictability of these exclusive models is limited. From a combination of the analysis of data from structures with various geometries, the objective of this study is to create, test, and validate generalizable metamodels that predict the results of finite element analysis. Developing these models requires two main steps: feature generation and model creation. In the first step, involving the use of 11 features for nodes and three for members, the physical representation of four types of domes, slabs, and walls were transformed into numerical values. Then, by randomly varying the cross-sectional area, the stress value of each member was recorded. In the second step, these feature vectors were used to create, test, and verify various metamodels in an examination of four hypotheses. The results of the hypotheses show that with generalizable metamodels, the analysis of data from various structures can be combined and used for predicting the performance of the members of structures or new structures within the same class of geometry. For instance, given the same radius for all domes, a metamodel generated from the analysis of data from a 700-, 980-, and 1,525-member dome can predict the structural performance of the members of these domes or a new dome with 250 members. In addition, the results show that generalizable metamodels are able to more closely predict the results of a finite element analysis than metamodels exclusively created for a specific structure. A case study was selected to examine the application of generalizable metamodels for the early-stage exploration of structural design alternatives in a construction project. The results illustrates that the optimization with generalizable metamodels reduces the time and cost of the project, fostering more efficient planning and more rapid decision-making by architects, contractors, and engineers at the early stage of construction projects.
-
ItemAn automated safety planning approach for residential construction sites in Malaysia(Georgia Institute of Technology, 2014) Irizarry, Javier ; Zolfagharian, Samaneh ; Ressang, Aziruddin ; Nourbakhsh, Mehdi ; Gheisari, Masoudin particular residential building construction. This paper aims at proposing an Automated Safety-Planning Plug-in (ASPP) for project scheduling software applications, to mitigate the occurrence of construction accidents. To achieve this aim, frequency and severity of the common construction safety hazards in residential buildings were investigated by distributing a questionnaire to safety managers and construction managers in Malaysia. A total of 106 completed responses were received. Then, risk level associated to each hazard was calculated based on the relevant risk matrix. The ASPP extracts current construction activities from any computer based schedule (Microsoft Project® in this paper) and identifies their risks level as well as safety regulations and hazards related to each activity as a report. A case study is used to investigate the reliability and usability of the ASPP. The ASPP was found to be efficient and helpful for rigorously complying with safety regulations and control potential hazards. The practical implication of this study is to improve construction safety by promoting the project managers’ awareness of safety hazards and associated risks as well as essential safety indicators provided through a comprehensive report.
-
ItemMobile Application Prototype for On-Site Information Management in Construction Industry(Georgia Institute of Technology, 2012) Nourbakhsh, Mehdi ; Zin, Rosli Mohamad ; Irizarry, Javier ; Zolfagharian, Sameneh ; Gheisari, MasoudPurpose: This paper presents the results of a study aimed at investigating the information requirements for broad use mobile applications for construction projects. It also presents the results of usability testing of a mobile application prototype for improving information management in construction projects. Design/methodology/approach: To achieve the research objectives, the information required to properly design the mobile application was collected by distributing an online questionnaire among construction professionals. Then a server-based application prototype was developed based on enterprise content management concepts. The mobile application was tested in a laboratory by setting a group of construction management postgraduate students who had experience on working in construction industry. Finding: This study determines and ranks the critical on-site information artifacts, considered highly important from the perspective of clients, consultants, and contractors. The study also illustrates the development of a mobile application prototype and results of a usability test. The test results demonstrate that the application is well designed, user friendly, and meets user requirements. Practical implications: The results of this study are useful for developing a functional mobile application to manage on-site information in construction projects. Originality/value: The paper makes an original contribution of investigating information requirements of a mobile application for on-site information management.