Title:
Micro-mechanical Modeling for Rate-Dependent Behavior of Salt Rock under Cyclic Loading
Micro-mechanical Modeling for Rate-Dependent Behavior of Salt Rock under Cyclic Loading
Author(s)
Shen, Xianda
Ding, Jihui
Arson, Chloé
Chester, Judith S.
Chester, Frederick M.
Ding, Jihui
Arson, Chloé
Chester, Judith S.
Chester, Frederick M.
Advisor(s)
Editor(s)
Collections
Supplementary to
Permanent Link
Abstract
The dependence of rock behavior on the deformation rate is still not well understood. In salt rock, the fundamental mechanisms that drive the accumulation of irreversible deformation, the reduction of stiffness and the development of hysteresis during cyclic loading are usually attributed to intracrystalline plasticity and diffusion. We hypothesize that at low pressure and low temperature, the rate-dependent behavior of salt rock is governed by water-assisted diffusion along grain boundaries.
Accordingly, a chemo-mechanical homogenization framework is proposed, in which the Representative Elementary Volume (REV) is viewed as a homogeneous polycrystalline matrix that contains sliding grain-boundary cracks. The slip is related to the mass of salt ions that diffuse along the crack surface. The relationship between fluid inclusion-scale and REV-scale stresses and strains is established by using the Mori-Tanaka homogenization scheme. It is noted from the model that a lower strain rate and a larger number of sliding cracks enhance stiffness reduction and hysteresis. Thinner sliding cracks (i.e. thinner brine films) promote stiffness reduction and accelerate stress redistributions. The larger the volume fraction of the crack inclusions, the larger the REV deformation and the larger the hysteresis. Results presented in this study shed light on the mechanical behavior of salt-rock that is pertinent to the design of geological storage facilities that undergo cyclic unloading, which could help optimize the energy production cycle with low carbon emissions.
Sponsor
Date Issued
2020
Extent
Resource Type
Text
Resource Subtype
Post-print