Person:
Goldman,
Daniel I.
Goldman,
Daniel I.
Permanent Link
Associated Organization(s)
Organizational Unit
ORCID
ArchiveSpace Name Record
Publication Search Results
Now showing
1 - 6 of 6
-
ItemMechanics of undulatory swimming in a frictional fluid(Georgia Institute of Technology, 2012-12) Ding, Yang ; Sharpe, Sarah S. ; Masse, Andrew ; Goldman, Daniel I.The sandfish lizard (Scincus scincus) swims within granular media (sand) using axial body undulations to propel itself without the use of limbs. In previous work we predicted average swimming speed by developing a numerical simulation that incorporated experimentally measured biological kinematics into a multibody sandfish model. The model was coupled to an experimentally validated soft sphere discrete element method simulation of the granular medium. In this paper, we use the simulation to study the detailed mechanics of undulatory swimming in a ‘‘granular frictional fluid’’ and compare the predictions to our previously developed resistive force theory (RFT) which models sand-swimming using empirically determined granular drag laws. The simulation reveals that the forward speed of the center of mass (CoM) oscillates about its average speed in antiphase with head drag. The coupling between overall body motion and body deformation results in a non-trivial pattern in the magnitude of lateral displacement of the segments along the body. The actuator torque and segment power are maximal near the center of the body and decrease to zero toward the head and the tail. Approximately 30% of the net swimming power is dissipated in head drag. The power consumption is proportional to the frequency in the biologically relevant range, which confirms that frictional forces dominate during sand-swimming by the sandfish. Comparison of the segmental forces measured in simulation with the force on a laterally oscillating rod reveals that a granular hysteresis effect causes the overestimation of the body thrust forces in the RFT. Our models provide detailed testable predictions for biological locomotion in a granular environment.
-
ItemLift-off dynamics in a simple jumping robot(Georgia Institute of Technology, 2012-10-26) Aguilar, Jeffrey ; Lesov, Alex ; Wiesenfeld, Kurt ; Goldman, Daniel I.We study vertical jumping in a simple robot comprising an actuated mass-spring arrangement. The actuator frequency and phase are systematically varied to find optimal performance. Optimal jumps occur above and below (but not at) the robot’s resonant frequency f0. Two distinct jumping modes emerge: a simple jump, which is optimal above f0, is achievable with a squat maneuver, and a peculiar stutter jump, which is optimal below f0, is generated with a countermovement. A simple dynamical model reveals how optimal lift-off results from nonresonant transient dynamics.
-
ItemEntangled granular media(Georgia Institute of Technology, 2012-05-17) Gravish, Nick ; Franklin, Scott V. ; Hu, David L. ; Goldman, Daniel I.We study the geometrically induced cohesion of ensembles of granular“u particles” that mechanically entangle through particle interpenetration. We vary the length-to-width ratio l/w of the u particles and form them into freestanding vertical columns. In a laboratory experiment, we monitor the response of the columns to sinusoidal vibration (with peak acceleration Γ). Column collapse occurs in a characteristic time τ which follows the relationτ∝exp(Γ/Δ). Δ resembles an activation energy and is maximal at intermediate l/w. A simulation reveals that optimal strength results from competition between packing and entanglement
-
ItemMulti-functional foot use during running in the zebra-tailed lizard (Callisaurus draconoides)(Georgia Institute of Technology, 2012-05) Li, Chen ; Hsieh, S. Tonia ; Goldman, Daniel I.A diversity of animals that run on solid, level, flat, non-slip surfaces appear to bounce on their legs; elastic elements in the limbs can store and return energy during each step. The mechanics and energetics of running in natural terrain, particularly on surfaces that can yield and flow under stress, is less understood. The zebra-tailed lizard (Callisaurus draconoides), a small desert generalist with a large, elongate, tendinous hind foot, runs rapidly across a variety of natural substrates. We use high-speed video to obtain detailed three-dimensional running kinematics on solid and granular surfaces to reveal how leg, foot and substrate mechanics contribute to its high locomotor performance. Running at ~10bodylengthss–1 (~1ms–1), the center of mass oscillates like a spring-mass system on both substrates, with only 15% reduction in stride length on the granular surface. On the solid surface, a strut-spring model of the hind limb reveals that the hind foot saves ~40% of the mechanical work needed per step, significant for the lizardʼs small size. On the granular surface, a penetration force model and hypothesized subsurface foot rotation indicates that the hind foot paddles through fluidized granular medium, and that the energy lost per step during irreversible deformation of the substrate does not differ from the reduction in the mechanical energy of the center of mass. The upper hind leg muscles must perform three times as much mechanical work on the granular surface as on the solid surface to compensate for the greater energy lost within the foot and to the substrate.
-
ItemDrag induced lift in granular media(Georgia Institute of Technology, 2011-01-14) Ding, Yang ; Gravish, Nick ; Goldman, Daniel I.Laboratory experiments and numerical simulation reveal that a submerged intruder dragged horizontally at a constant velocity within a granular medium experiences a lift force whose sign and magnitude depend on the intruder shape. Comparing the stress on a flat plate at varied inclination angle with the local surface stress on the intruders at regions with the same orientation demonstrates that intruder lift forces are well approximated as the sum of contributions from flat-plate elements. The plate stress is deduced from the force balance on the flowing media near the plate.
-
ItemBiophysically inspired development of a sand-swimming robot(Georgia Institute of Technology, 2011) Maladen, Ryan D. ; Ding, Yang ; Umbanhowar, Paul B. ; Kamor, Adam ; Goldman, Daniel I.Previous study of a sand-swimming lizard, the sandfish, Scincus scincus, revealed that the animal swims within granular media at speeds up to 0:4 body-lengths/cycle using body undulation (approximately a single period sinusoidal traveling wave) without limb use [1]. Inspired by this biological experiment and challenged by the absence of robotic devices with comparable subterranean locomotor abilities, we developed a numerical simulation of a robot swimming in a granular medium (modeled using a multi-particle discrete element method simulation) to guide the design of a physical sand-swimming device built with off-the-shelf servo motors. Both in simulation and experiment the robot swims limblessly subsurface and, like the animal, increases its speed by increasing its oscillation frequency. It was able to achieve speeds of up to 0:3 body-lengths/cycle. The performance of the robot measured in terms of its wave efficiency, the ratio of its forward speed to wave speed, was 0:34 0:02, within 8 % of the simulation prediction. Our work provides a validated simulation tool and a functional initial design for the development of robots that can move within yielding terrestrial substrates.