Person:
Rohatgi, Ajeet

Permanent Link
https://hdl.handle.net/1853/71640
Associated Organization(s)
ORCID
ArchiveSpace Name Record

Filters

1998 2
2
2
2
Reset filters

Settings
Author: Ruby, D. S. × End date: 1999 × Start date: 1990 × Type: Text ×

Publication Search Results

Now showing 1 - 2 of 2
Thumbnail Image
Item

Comparison of Front and Back Surface Passivation Schemes for Silicon Solar Cells

1998-07 , Moschner, J. D. , Doshi, P. , Ruby, D. S. , Lauinger, T. , Aberle, A. G. , Rohatgi, Ajeet

This work presents a comprehensive study on fast, low-cost methods for the electronic passivation of the phosphorus-diffused front surface and the non-diffused p-type rear surface of crystalline Si solar cells. Titanium dioxide is compared with rapidly-grown thermal oxide (RTO) and PECVD silicon nitrides from three different laboratories. Double layers of RTO and Ti02 or SiN are also investigated. We demonstrate that SiN and RTO single layers can provide very good passivation on both the front and back surface of solar cells. It is also shown that double layers consisting of a thin RTO film and silicon nitride can improve the passivation quality of most SiN layers, and enhance the stability under thermal treatment. With the proper choice of RTO, SiN, and thermal treatment, excellent surface recombination velocities on the back as well as very low emitter saturation currents can he reached using these fast, industrially feasible methods. All films used also provide or are compatible with a good antireflection coating of the cell surface.

View
Thumbnail Image
Item

Effective Passivation of the Low Resistivity Silicon Surface by a Rapid Thermal Oxide/PECVD Silicon Nitride Stack and Its Application to Passivated Rear and Bifacial Si Solar Cells

1998-07 , Rohatgi, Ajeet , Narasimha, S. , Ruby, D. S.

A novel stack passivation scheme, in which plasma silicon nitride (SiN) is stacked on top of a rapid thermal SiO(2) (RTO) layer, is developed to attain a surface recombination velocity (S) approaching 10 em/s at the 1.3 Ω-cm p-type (l00) silicon surface. Such low S is achieved by the stack even when the RTO and SiN films individually yield considerably poorer surface passivation. Critical to achieving low S by the stack is the use of a short, moderae temperature anneal (in this study 730°C for 30 seconds) after film growth and deposition. This anneal is believed to enhance the release and delivery of atomic hydrogen from the SiN film to the Si-Si0(2) interface, thereby reducing the density of interface traps at the surface. Compatibility with this post-deposition anneal makes the stack passivation scheme attractive for cost-effective solar cell production since a similar anneal is required to fire screen-printed contacts. Application of the stack to passivated rear screen-printed solar cells has resulted in V(oc)'s of 641 mV and 633 mV on 0.65 Ω-cm and 1.3 Ω-cm FZ Si substrates, respectively. These V(oc) values are roughly 20 mV higher than for cells with untreated, highly recombinative back surfaces. The stack passivation has also been used to form fully screen-printed bifacial solar cells which exhibit rear-illuminated efficiency as high as 11.6% with a single layer AR coating.

View