Organizational Unit:

Aerospace Design Group

Permanent Link

https://hdl.handle.net/1853/70743

Parent Organization

Organizational Unit

Daniel Guggenheim School of Aerospace Engineering

ArchiveSpace Name Record

https://finding-aids.library.gatech.edu/agents/corporate_entities/1134

Full item page

Publication Search Results

Now showing 1 - 10 of 41

Methods for Localization and Mapping Using Vision and Inertial Sensors

(Georgia Institute of Technology, 2008-08) Wu, Allen D. ; Johnson, Eric N.

The problems of vision-based localization and mapping are currently highly active areas of research for aerial systems. With a wealth of information available in each image, vision sensors allow vehicles to gather data about their surrounding environment in addition to inferring own-ship information. However, algorithms for processing camera images are often cumbersome for the limited computational power available onboard many unmanned aerial systems. This paper therefore investigates a method for incorporating an inertial measurement unit together with a monocular vision sensor to aid in the extraction of information from camera images, and hence reduce the computational burden for this class of platforms. Feature points are detected in each image using a Harris corner detector, and these feature measurements are statistically corresponded across each captured image using knowledge of the vehicle's pose. The investigated methods employ an Extended Kalman Filter framework for estimation. Real-time hardware results are presented using a baseline configuration in which a manufactured target is used for generating salient feature points, and vehicle pose information is provided by a high precision motion capture system for comparison purposes.
UAS Reference Scenarios for MANET Development

(Georgia Institute of Technology, 2008-08) Christmann, Hans Claus ; Johnson, Eric N.

After autonomous flight for Unmanned Aerial Vehicles (UAVs) has been accomplished, research was stipulated to look into application related challenges in connection with Unmanned Aerial Systems (UAS). As one possible scenario, swarms of collaborating UAVs can be envisioned and allow for more complex missions and scenarios. One essential building block in simultaneously operating several UAVs is the UAS internal and external communication. Ground control station operators need to communicate guidance, navigation, and control (GNC) data, external beneficiaries of the UAS operation need to be provided with obtained sensor data and intelligence. All this requires sophisticated wireless communication networks and Mobile Ad-hoc Networks (MANETs) step into the picture. However, evaluating the performance of different MANETs in a UAS environment is non-trivial: relevant metrics and evaluation procedures have to be established for a simulation based performance prediction during the design phase of a MANET. Unfortunately, published results on MANET performance are not necessarily comparable across different papers, due to differences in the underlying assumptions. Some findings might not even be applicable to a UAS environment. This paper proposes a set of reference scenarios in order to allow for comparable and applicable results in MANET simulations. The presented scenarios mimic realistic UAS missions, both, on the operational side of the participating network nodes, as well as on the network traffic side. The reference scenarios capture the essence of current UAVs and UAS missions in a civil, research, or military context, hence providing the means to simulate different MANET protocols in a UAS setting.
Guidance, Navigation, Control, and Operator Interfaces for Small Rapid Response Unmanned Helicopters

(Georgia Institute of Technology, 2008-04) Christmann, Hans Claus ; Christophersen, Henrik B. ; Wu, Allen D. ; Johnson, Eric N.

This paper focuses on the development of small rapid response reconnaissance unmanned helicopters (1 to 3 kg, electric), for use by the military in urban areas and by civilian first responders, in terms of system architecture, automation (including navigation, flight control, and guidance), and operator interface designs. Design objectives include an effective user interface, a vehicle capable of smooth and precise motion control, an ability to display clear images to an operator, and a vehicle that is capable of safe and stable flight.
Flight-Test Results of Autonomous Airplane Transitions Between Steady-Level and Hovering Flight

(Georgia Institute of Technology, 2008-03) Johnson, Eric N. ; Wu, Allen D. ; Neidhoefer, James C. ; Kannan, Suresh K. ; Turbe, Michael A.

Linear systems can be used to adequately model and control an aircraft in either ideal steady-level flight or in ideal hovering flight. However, constructing a single unified system capable of adequately modeling or controlling an airplane in steady-level flight and in hovering flight, as well as during the highly nonlinear transitions between the two, requires the use of more complex systems, such as scheduled-linear, nonlinear, or stable adaptive systems. This paper discusses the use of dynamic inversion with real-time neural network adaptation as a means to provide a single adaptive controller capable of controlling a fixed-wing unmanned aircraft system in all three flight phases: steady-level flight, hovering flight, and the transitions between them. Having a single controller that can achieve and transition between steady-level and hovering flight allows utilization of the entire low-speed flight envelope, even beyond stall conditions. This method is applied to the GTEdge, an eight-foot wingspan, fixed-wing unmanned aircraft system that has been fully instrumented for autonomous flight. This paper presents data from actual flight-test experiments in which the airplane transitions from high-speed, steady-level flight into a hovering condition and then back again.
Adaptive, Integrated Guidance and Control Design for Line-of-Sight-Based Formation Flight

(Georgia Institute of Technology, 2007-10) Kim, Byoung Soo ; Calise, Anthony J. ; Sattigeri, Ramachandra J.

This paper presents an integrated guidance and control design for formation flight using a combination of adaptive output feedback and backstepping techniques. We formulate the problem as an adaptive output feedback control problem for a line-of-sight-based formation flight configuration of a leader and a follower aircraft. The design objective is to regulate range and two bearing angle rates while maintaining turn coordination. Adaptive neural networks are trained online with available measurements to compensate for unmodeled nonlinearities in the design process. These include uncertainties due to unknown leader aircraft acceleration, and the modeling error due to parametric uncertainties in the aircraft aerodynamic derivatives. One benefit of this approach is that the guidance and flight control design process is integrated. Simulation results using a nonlinear 6 degrees-of-freedom simulation model are presented to illustrate the efficacy of the approach by comparing the performance with an adaptive timescale separation-based guidance and control design.
Design and Implementation of a Self-configuring Ad-hoc Network for Unmanned Aerial Systems

(Georgia Institute of Technology, 2007-10) Christmann, Hans Claus ; Johnson, Eric N.

Unmanned aerial vehicles (UAVs), and unmanned aerial systems (UAS) as such in general, need wireless networks in order to communicate. UAS are very flexible and hence allow for a wide range of missions by means of utilizing different UAVs according to the mission requirements. Each of these missions also poses special needs and requirements on the communication network. Especially, mission scenarios calling for UAV swarms increase the complexity and call for specialized communication solutions. This work focuses on these specialties and needs and describes the selection process, adaptation and implementation of an ad-hoc routing protocol tailored to an UAV surrounding and a correspondingly adapted communication method.
Adaptive Neural Network Flight Control Using both Current and Recorded Data

(Georgia Institute of Technology, 2007-08) Chowdhary, Girish ; Johnson, Eric N.

Modern aerospace vehicles are expected to perform beyond their conventional flight envelopes and exhibit the robustness and adaptability to operate in uncertain environments. Augmenting proven lower level control algorithms with adaptive elements that exhibit long term learning could help in achieving better adaptation performance while performing aggressive maneuvers. The current adaptive methodologies which use Neural Network based control methods use only the instantaneous states to tune the adaptive gains. This results in a rank one limitation on the adaptive law. In this paper we propose a novel approach to adaptive control, which uses the current or the online information as well as stored or background information for adaptation. We show that using a combined online and background learning approach it is possible to overcome the rank one limitation on the adaptive law resulting in faster adaptation to the unknown dynamics. Furthermore, we show that using combined online and background learning methods it is possible to guarantee long term learning in the adaptive flight controller, which enhances performance of the controller when it encounters a maneuver that has been performed in the past. We use Lyapunov based methods for showing boundedness of all signals for a proposed method. The performance of the proposed method is evaluated in the high fidelity simulation environment for the GTMAX UAS maintained by the Georgia Tech UAV lab. The simulation results show that the proposed method exhibits long term learning and faster adaptation leading to better performance of the UAS flight controller.
Vision-based Target Tracking with Adaptive Target State Estimator

(Georgia Institute of Technology, 2007-08) Sattigeri, Ramachandra J. ; Johnson, Eric N. ; Calise, Anthony J. ; Ha, Jin-Cheol

This paper presents an approach to vision-based target tracking with a neural network (NN) augmented Kalman filter as the adaptive target state estimator. The vision sensor onboard the follower (tracker) aircraft is a single camera. Real-time image processing implemented in the onboard flight computer is used to derive measurements of relative bearing (azimuth and elevation angles) and the maximum angle subtended by the target aircraft on the image plane. These measurements are used to update the NN augmented Kalman filter. This filter generates estimates of the target aircraft position, velocity and acceleration in inertial 3D space that are used in the guidance and flight control law to guide the follower aircraft relative to the target aircraft. Applications of the presented approach include vision-based autonomous formation flight, pursuit and autonomous aerial refueling. The NN augmenting the Kalman filter estimates the target acceleration and hence provides for robust state estimation in the presence of unmodeled target maneuvers. Vision-in-the-loop simulation results obtained in a 6DOF real-time simulation of vision-based autonomous formation flight are presented to illustrate the efficacy of the adaptive target state estimator design.
Integration of Adaptive Estimation and Adaptive Control Design for Uncertain Nonlinear Systems

(Georgia Institute of Technology, 2007-08) Sattigeri, Ramachandra J. ; Calise, Anthony J. ; Kim, Byoung Soo

This paper presents a method to integrate adaptive estimation and adaptive control designs for a class of uncertain nonlinear systems having both parametric uncertainties and unmodeled dynamics. The method is based on Lyapunov-like stability analysis of all the errors in the closed-loop system. The adaptive estimator considered is a linear, time-varying Kalman filter augmented by the output of an observer neural network. The observer neural network compensates the nominal Kalman filter for modeling errors. The estimated states are used in the construction of an adaptive control solution that is based on approximate feedback linearization augmented with the outputs of an adaptive neural network controller. The presented approach is then applied to a vision-based formation flight control problem. The objective is for a follower aircraft to maintain range from a maneuvering leader aircraft using a monocular fixed camera for passive sensing of the leader's relative motion. In the implementation, the states of the adaptive estimator are estimates of line-of-sight variables and the outputs of the observer neural network are estimates of the leader acceleration. The adaptive control solution considered is an integrated guidance and control design that includes online adaptation to unmodeled nonlinearities such as the unknown leader aircraft acceleration and parametric uncertainties in the own-aircraft aerodynamic derivatives. Simulation results using a nonlinear 6DOF simulation model of a fixed-wing UAV are presented to illustrate the feasibility and efficacy of the approach.
Adaptive Output Feedback Control of a Flexible Base Manipulator

(Georgia Institute of Technology, 2007-07) Yang, Bong-Jun ; Calise, Anthony J. ; Craig, James I.

This paper considers augmentation of an existing inertial damping mechanism by neural network-based adaptive control, for controlling a micromanipulator that is serially attached to a macromanipulator. The approach is demonstrated using an experimental test bed in which the micromanipulator is mounted at the tip of a cantilevered beam that resembles a macromanipulator with its joint locked. The inertial damping control combines acceleration feedback with position control for the micromanipulator so as to simultaneously suppress vibrations caused by the flexible beam while achieving precise tip positioning. Neural network-based adaptive elements are employed to augment the inertial damping controller when the existing control system becomes deficient due to modeling errors and uncertain operating conditions. There were several design challenges that had to be faced from an adaptive control perspective. One challenge was the presence of a nonminimum phase zero in an output feedback adaptive control design setting in which the regulated output variable has zero relative degree. Other challenges included flexibility in the actuation devices, lack of control degrees of freedom, and high dimensionality of the system dynamics. In this paper we describe how we overcame these difficulties by modifying a previous augmenting adaptive approach to make it suitable for this application. Experimental results are provided to illustrate the effectiveness of the augmenting approach to adaptive output feedback control design.