Organizational Unit:
Aerospace Design Group

Permanent Link
https://hdl.handle.net/1853/70743
Research Organization Registry ID
Description
Previous Names
Parent Organization
Parent Organization
Includes Organization(s)
ArchiveSpace Name Record
https://finding-aids.library.gatech.edu/agents/corporate_entities/1134

Filters

2007 3
3
3
3
Reset filters

Settings
End date: 2007 × Start date: 2007 × search.filters.applied.f.isOrgUnitOfPublicationTitle: Daniel Guggenheim School of Aerospace Engineering × search.filters.applied.f.resourcesubtype: Article ×

Publication Search Results

Now showing 1 - 3 of 3
Thumbnail Image
Item

Adaptive, Integrated Guidance and Control Design for Line-of-Sight-Based Formation Flight

2007-10 , Kim, Byoung Soo , Calise, Anthony J. , Sattigeri, Ramachandra J.

This paper presents an integrated guidance and control design for formation flight using a combination of adaptive output feedback and backstepping techniques. We formulate the problem as an adaptive output feedback control problem for a line-of-sight-based formation flight configuration of a leader and a follower aircraft. The design objective is to regulate range and two bearing angle rates while maintaining turn coordination. Adaptive neural networks are trained online with available measurements to compensate for unmodeled nonlinearities in the design process. These include uncertainties due to unknown leader aircraft acceleration, and the modeling error due to parametric uncertainties in the aircraft aerodynamic derivatives. One benefit of this approach is that the guidance and flight control design process is integrated. Simulation results using a nonlinear 6 degrees-of-freedom simulation model are presented to illustrate the efficacy of the approach by comparing the performance with an adaptive timescale separation-based guidance and control design.

View
Thumbnail Image
Item

Adaptive Output Feedback Control of a Flexible Base Manipulator

2007-07 , Yang, Bong-Jun , Calise, Anthony J. , Craig, James I.

This paper considers augmentation of an existing inertial damping mechanism by neural network-based adaptive control, for controlling a micromanipulator that is serially attached to a macromanipulator. The approach is demonstrated using an experimental test bed in which the micromanipulator is mounted at the tip of a cantilevered beam that resembles a macromanipulator with its joint locked. The inertial damping control combines acceleration feedback with position control for the micromanipulator so as to simultaneously suppress vibrations caused by the flexible beam while achieving precise tip positioning. Neural network-based adaptive elements are employed to augment the inertial damping controller when the existing control system becomes deficient due to modeling errors and uncertain operating conditions. There were several design challenges that had to be faced from an adaptive control perspective. One challenge was the presence of a nonminimum phase zero in an output feedback adaptive control design setting in which the regulated output variable has zero relative degree. Other challenges included flexibility in the actuation devices, lack of control degrees of freedom, and high dimensionality of the system dynamics. In this paper we describe how we overcame these difficulties by modifying a previous augmenting adaptive approach to make it suitable for this application. Experimental results are provided to illustrate the effectiveness of the augmenting approach to adaptive output feedback control design.

View
Thumbnail Image
Item

Real-Time Vision-Based Relative Aircraft Navigation

2007-03 , Johnson, Eric N. , Calise, Anthony J. , Watanabe, Yoko , Ha, Jin-Cheol , Neidhoefer, James C.

This paper describes two vision-based techniques for the navigation of an aircraft relative to an airborne target using only information from a single camera fixed to the aircraft. These techniques are motivated by problems such as "see and avoid", pursuit, formation flying, and in-air refueling. By applying an Extended Kalman Filter for relative state estimation, both the velocity and position of the aircraft relative to the target can be estimated. While relative states such as bearing can be estimated fairly easily, estimating the range to the target is more difficult because it requires achieving valid depth perception with a single camera. The two techniques presented here offer distinct solutions to this problem. The first technique, Center Only Relative State Estimation, uses optimal control to generate an optimal (sinusoidal) trajectory to a desired location relative to the target that results in accurate range-to-target estimates while making minimal demands on the image processing system.The second technique, Subtended Angle Relative State Estimation, uses more rigorous image processing to arrive at a valid range estimate without requiring the aircraft to follow a prescribed path. Simulation results indicate that both methods yield range estimates of comparable accuracy while placing different demands on the aircraft and its systems.

View