(Georgia Institute of Technology, 2014)
Liles, Howard; Huang, Morris; Caspall, Jayme; Sprigle, Stephen
A wheelchair-propelling robot has been developed to measure the efficiency of manual wheelchairs. The use of a robot has certain advantages compared to the use of human operators with respect to repeatability of measurements and the ability to compare many more wheelchair configurations than possible with human operators. Its design and implementation required significant engineering and validation of hardware and control systems. The robot can propel a wheelchair according to pre-programmed accelerations and velocities and measures the forces required to achieve these maneuvers. Wheel velocities were within 0.1 m/s of programmed values and coefficients of variation (CV) < 2%. Torque measurements were also repeatable with CV <10%. By determining the propulsion torque required to propel the wheelchair through a series of canonical maneuvers, task-dependent input work for various wheelchairs and configurations can be compared. This metric would serve to quantify the combined inertial and frictional resistance of the mechanical system.
(Georgia Institute of Technology, 2007)
Sprigle, Stephen
The Wheeled Mobility State of the Science Conference, hosted by the mobilityRERC at the Georgia Institute of Technology, was a forum to identify and discuss important research topics. The Conference was configured around Breakout Groups which were assigned specific research topics. These topics were selected via dot-voting by Conference attendees. The charge to the Breakout Groups was simple, yet unattainable: “Configure your research topic into a research project”. They were provided with general guidelines to identify research questions, specific aims or hypotheses, significance, study design possibilities, recruitment considerations, measurement variables and tools, analysis considerations, and anticipated challenges.
This article summarizes the discussions from the Seating and Positioning Breakout Groups. The four research topics selected for discussion were: Impact of a seating and mobility intervention, Defining a systematic clinical approach to cushion selection, Functional impact of wheelchair cushions, and Long term impact of sitting. One member of each Group documented the discussion and a summary presentation was made to all Conference attendees. The following synopses were compiled from the Group notes and presentation. They are presented in sequence and reflect variability in discussion, presentation and content. Some research topics were more amenable to the suggested guidelines than others.