Title:
A Laboratory System for Simulation of Extreme Atmospheric Conditions in the Deep Atmospheres of Venus, Jupiter, and Beyond

dc.contributor.author Karpowicz, Bryan M. en_US
dc.contributor.author Steffes, Paul G. en_US
dc.contributor.author Hanley, Thomas R. en_US
dc.contributor.corporatename Georgia Institute of Technology. School of Earth and Atmospheric Sciences en_US
dc.contributor.corporatename Georgia Institute of Technology. School of Electrical and Computer Engineering en_US
dc.date.accessioned 2009-01-20T20:09:44Z
dc.date.available 2009-01-20T20:09:44Z
dc.date.issued 2008-06-25
dc.description This presentation was part of the session : Extreme Environments en_US
dc.description Sixth International Planetary Probe Workshop en_US
dc.description.abstract A new atmospheric simulator, in operation and developed at Georgia Tech, now offers a flexible platform for simulating deep planetary atmospheres. In its current configuration, the laboratory system has been designed to simulate the deep Jovian atmosphere, and measure the microwave opacity of key atmospheric constituents. A 30 liter pressure vessel has been designed to withstand a pressure up to 100 bars of hydrogen, and helium with trace amounts of either ammonia or water vapor. A high temperature chamber along with the pressure vessel allows for simulations with a temperature ranging from 295-616 K. Within the pressure vessel a cylindrical microwave cavity is used to measure the microwave opacity of ammonia and water vapor. Two custom built feedthroughs allow us to excite, and measure absorption inside the simulator, while keeping a network analyzer (measuring wavelengths between 5 to 25 cm) at room temperature. The primary motivation for this system is to provide reliable microwave opacity models for use in interpreting data from the Juno microwave radiometer (MWR). The Juno-MWR will be capable of sensing centimeter-wavelength emission from the very deep atmosphere of Jupiter at pressures exceeding 100 Bars (Janssen et al., 2005, Icarus 171, 447-453). In order to accurately retrieve the abundances of microwave absorbing constituents such as ammonia and water vapor from measurements of the centimeter-wave emission from these deep layers, precise knowledge of the absorptive properties of these gases under deep atmospheric conditions is necessary. To date, only a very limited number of measurements have been made of the microwave absorption of ammonia or water vapor at such high pressures, and none of these measurements were conducted at wavelengths greater than 3.3 cm. While our primary motivation is to provide this critical information, this is not the only function our system may perform. In the future this system could easily be adapted to provide a test platform for instrumentation and hardware that must withstand some of the harshest atmospheric conditions, including those of Venus which has a surface pressure up to 100 bars. While the Venus surface temperature exceeds our maximum simulator temperature (616 K), it would certainly be a sufficient test platform for a variety of entry probe hardware for Venus, Jupiter or any other planetary atmosphere which reaches 100 bars pressure. This work is supported by NASA Contract NNM06AA75C from the Marshall Space Flight Center supporting the Juno Mission Science Team, under Subcontract 699054X from the Southwest Research Institute. en_US
dc.description.sponsorship NASA Contract NNM06AA75C from the Marshall Space Flight Center supporting the Juno Mission Science Team, under Subcontract 699054X from the Southwest Research Institute. en_US
dc.identifier.uri http://hdl.handle.net/1853/26395
dc.publisher Georgia Institute of Technology en_US
dc.relation.ispartofseries IPPW08. Extreme Environments en_US
dc.subject Jupiter en_US
dc.subject Remote sensing en_US
dc.subject Extreme environments en_US
dc.subject Venus en_US
dc.subject Pressure vessel en_US
dc.subject High pressure system en_US
dc.title A Laboratory System for Simulation of Extreme Atmospheric Conditions in the Deep Atmospheres of Venus, Jupiter, and Beyond en_US
dc.type Text
dc.type.genre Proceedings
dspace.entity.type Publication
local.contributor.author Steffes, Paul G.
local.contributor.corporatename Daniel Guggenheim School of Aerospace Engineering
local.contributor.corporatename College of Engineering
local.relation.ispartofseries International Planetary Probe Workshop (IPPW)
relation.isAuthorOfPublication c3d19a17-5d56-4df3-a89a-d5d07477b568
relation.isOrgUnitOfPublication a348b767-ea7e-4789-af1f-1f1d5925fb65
relation.isOrgUnitOfPublication 7c022d60-21d5-497c-b552-95e489a06569
relation.isSeriesOfPublication 6369d36f-9ab2-422f-a97e-4844b98f173b
Files
Original bundle
Now showing 1 - 5 of 6
No Thumbnail Available
Name:
8-257-1-PB.ppt
Size:
5.51 MB
Format:
Microsoft Powerpoint
Description:
Revised Power Point Presentation
No Thumbnail Available
Name:
8-102-1-PB.wmv
Size:
43.93 MB
Format:
Windows Media Video format
Description:
Crane Lift Video
No Thumbnail Available
Name:
8-218-1-PB.ppt
Size:
25.81 MB
Format:
Microsoft Powerpoint
Description:
Power Point Presentation
Thumbnail Image
Name:
8-104-1-PB.pdf
Size:
403.06 KB
Format:
Adobe Portable Document Format
Description:
Paper
Thumbnail Image
Name:
8-219-1-PB.pdf
Size:
1.43 MB
Format:
Adobe Portable Document Format
Description:
PDF Presentation
Collections