Membranes for heat integrated carbon dioxide capture via cold conditions operation

Files
LIU-DISSERTATION-2015.pdf (4.13 MB)
Author(s)
Liu, Lu
Advisor(s)
Editor(s)
Associated Organization(s)
Organizational Unit
School of Chemical and Biomolecular Engineering
School established in 1901 as the School of Chemical Engineering; in 2003, renamed School of Chemical and Biomolecular Engineering
Organizational Unit
Series
Collections
Theses and Dissertations
Supplementary to:
Permanent Link
http://hdl.handle.net/1853/54844
Abstract
Flue gas carbon dioxide emissions from coal-based power plants are suggested as a factor causing climate change. Membrane is an attractive technology for the capture of carbon dioxide from flue gas. Matrimid® asymmetric hollow fiber membranes with “homogeneous dense” and “fused nodular” selective layers were successfully formed. The PDMS post-treated nodular-skinned fibers showed better cold performance than the dense-skinned fibers with bore side feed. A hypothesis with regards to increased sorption capacity coupled with orientated polymer chain segments for the nodular skin was proposed and supported by indirect evidences. Based on the understanding of CO2 and N2 transport in cold Matrimid® hollow fiber membranes, a second generation of cold membranes with superior performance was developed. The high free volume, rigid 6FDA/BPDA-DAM hollow fiber membranes with both dense and nodular selective layers were successfully formed as well, which showed similar selectivity but much higher permeance than the high performing nodular Matrimid® hollow fiber membranes at cold conditions.
Sponsor
Date
2015-01-02
Extent
Resource Type
Text
Resource Subtype
Dissertation
Rights Statement
Rights URI