Title:
Design of High-Speed Laser Driver Using a Standard CMOS Technology for Optical Data Transmission
Design of High-Speed Laser Driver Using a Standard CMOS Technology for Optical Data Transmission
Author(s)
Hyun, Seok Hun
Advisor(s)
Brooke, Martin A.
Editor(s)
Collections
Supplementary to
Permanent Link
Abstract
Many researchers and engineers designing laser drivers for data rates at or above 10 gigabits per second (Gbps) implemented their designs using integrated circuit technologies that provide high bandwidth and good quality passive components such as GaAs, silicon bipolar, and InP. However, in low-cost and high volume short-haul applications at data rates of around 10 Gbps (such as LAN, MAN, and board-to-board interconnection), there has been an increasing interest in commercial CMOS technology for implementing the laser driver. This is because CMOS technology has unique advantages such as low power and low cost of fabrication that are the result of high yield and a high degree of integration. Therefore, the objective of this research in this dissertation is to investigate the possibility of implementing a high-speed CMOS laser driver for these cost sensitive applications.
The high-speed CMOS laser drivers designed in this research are of two types. The first type is a low power laser driver for driving a vertical cavity surface emitting laser (VCSEL). The other driver type is a high current laser driver for driving edge-emitting lasers such as double-heterojunction (DH), multiquantum well (MQW), or Febry-Perrot (FP) lasers.
The parasitic effects of the layout geometry are crucial in the design of the high-speed laser drivers. Thus, in this research, all simulations contain a complete set of parasitic elements extracted from the layout of the laser driver. To test laser drivers, chip-on-board (COB) technology is employed, and printed circuit boards (PCBs) to test the laser drivers are designed at the same time as the laser drivers themselves and manufactured specifically for these tests.
This research makes two significant new contributions to the technology that are reported and described here. One is the first 10 Gbps performance of a differential CMOS laser driver with better than 10-14 bit-error-rate (BER). The second is the first demonstration of a heterogeneous integration method to integrate independently grown and customized thin film lasers onto CMOS laser driver circuits to form an optical transmitter.
Sponsor
Date Issued
2004-11-22
Extent
2697790 bytes
Resource Type
Text
Resource Subtype
Dissertation