Evaluation of Deployable Aerosurface Systems for
Mars Entry
Author(s)
Cruz-Ayoroa, Juan G.
Advisor(s)
Braun, Robert D.
Editor(s)
Collections
Supplementary to:
Permanent Link
Abstract
One of the challenges presented by the exploration of Mars is the entry, descent and landing (EDL)
of payloads to the surface. Current robotic missions to Mars are reaching the limist of existing Viking heritage EDL technologies. A number of EDL technology improvements can be made to extend the
capabilities beyond the current landed mass limits, including increasing the entry vehicle hypersonic
drag and lift capability. Technologies being currently studied include inflatable aerodynamic
decelerators, which are designed to increase vehicle drag. Many of these concepts center on
axisymmetric designs, which provide high drag but relatively low lift and are most easily integrated to
blunt entry vehicles. However, due to packaging density and launch vehicle fairing constraints, it is
likely that future missions will require the use of slender bodies. This study investigates three
deployable concepts designed to provide better integration into a slender vehicle while augmenting its
performance by increasing its hypersonic drag. The deployable aerosurfaces are applied to a 5 meter
diameter slender vehicle for a robotic mission at Mars with entry masses ranging from 10 to 60t. A
multidisciplinary design optimization framework is used to estimate the landed mass capability of each
system. Results show that the deployable concepts can significantly improve payload mass capability
by reducing the terminal propulsion propellant required. Initial feasibility studies show that the
concepts are hypersonically statically stable and comply with mechanical and thermal material
capabilities
Sponsor
Date
2012-12-14
Extent
Resource Type
Text
Resource Subtype
Masters Project
Rights Statement
Unless otherwise noted, all materials are protected under U.S. Copyright Law and all rights are reserved