Title:
On the deflection of s32003 stainless steel beams
On the deflection of s32003 stainless steel beams
| dc.contributor.advisor | Zureick, Abdul-Hamid | |
| dc.contributor.author | Said, Eman | |
| dc.contributor.committeeMember | Muhanna, Rafi L. | |
| dc.contributor.committeeMember | Scott, David W. | |
| dc.contributor.department | Civil and Environmental Engineering | |
| dc.date.accessioned | 2016-05-27T13:11:18Z | |
| dc.date.available | 2016-05-27T13:11:18Z | |
| dc.date.created | 2016-05 | |
| dc.date.issued | 2016-01-15 | |
| dc.date.submitted | May 2016 | |
| dc.date.updated | 2016-05-27T13:11:18Z | |
| dc.description.abstract | Presented in this work are the results of twelve flexural tests conducted on small-scale coupons to establish the load-deflection behavior of UNS S32003 (ATI 2003®) hot-rolled duplex stainless steel flat plates. All specimens were tested as simply supported beams loaded at the midspan. Test specimens had nominal width and thickness of 1 in. and 0.25 in., respectively. Four different span lengths of 4 in., 6 in., 9 in., and 12 in. were investigated. Analysis of the results showed that the non-linear deflection behavior can be estimated reasonably well by adopting the conventional deflection equation pertaining to an assumed linear elastic material, but after replacing the modulus of elasticity with a secant modulus corresponding to the maximum tension strain resulting from the applied load. | |
| dc.description.degree | M.S. | |
| dc.format.mimetype | application/pdf | |
| dc.identifier.uri | http://hdl.handle.net/1853/54918 | |
| dc.language.iso | en_US | |
| dc.publisher | Georgia Institute of Technology | |
| dc.subject | Duplex stainless steel | |
| dc.subject | UNS S32003 | |
| dc.subject | ATI 2003 | |
| dc.subject | Beam deflection | |
| dc.subject | Non-linear deflection | |
| dc.subject | Flexural test | |
| dc.subject | Three-point bending test | |
| dc.subject | Secant modulus | |
| dc.title | On the deflection of s32003 stainless steel beams | |
| dc.type | Text | |
| dc.type.genre | Thesis | |
| dspace.entity.type | Publication | |
| local.contributor.advisor | Zureick, Abdul-Hamid | |
| local.contributor.corporatename | School of Civil and Environmental Engineering | |
| local.contributor.corporatename | College of Engineering | |
| relation.isAdvisorOfPublication | c9090e54-a84d-438c-8b44-20eacdf1aa50 | |
| relation.isOrgUnitOfPublication | 88639fad-d3ae-4867-9e7a-7c9e6d2ecc7c | |
| relation.isOrgUnitOfPublication | 7c022d60-21d5-497c-b552-95e489a06569 | |
| thesis.degree.level | Masters |