Responsive Access Small Cargo Affordable Launch (RASCAL) Independent Performance Evaluation
Loading...
Author(s)
Young, David
Advisor(s)
Olds, John R.
Editor(s)
Collections
Supplementary to:
Permanent Link
Abstract
RASCAL is a Defense Department initiative that stands for Responsive Access,
Small Cargo, Affordable Launch [2]. The overall launch concept involves three stages.
The first stage will consist of a reusable aircraft similar to a large scale Air Force fighter.
The first stage will also utilize Mass Injection Pre-Compressor Cooling (MIPCC) turbojet
engines that will propel the stage to approximately two hundred thousand feet before
releasing the second and third rocket stages. The first stage will be similar to a large
fighter of the F-22 class, although the turbofans will be that of the more available F100
class. The MIPCC system will be a plug-in addition to the engines to help high altitude
performance. This stage will be not only a “Launch Platform”, but more of a first stage
in that it will contribute significantly to the overall acceleration of the vehicle
The second and third stages will consist of simple expendable rockets. Releasing
the upper stages outside the atmosphere will reduce the loads on the stages as well as the
risk of staging. Also by relying on the reusable portion for all atmospheric flight, the
expendable stages can be designed simpler and therefore cheaper.
The purpose of this project is to compare the published RASCAL numbers with
those computed using a design methodology currently used in the Space System Design
Laboratory (SSDL) at The Georgia Institute of Technology. When the initial Space
Launch Corporation design was evaluated using the SSDL methodology it was found to
fall short of the performance as well as the cost goals set by DARPA for the RASCAL
program. The baseline vehicle was found to only carry 52 lbs to the 270 nmi sun
synchronous orbit. Several alternatives were evaluated off of the baseline design. The
best of these alternatives can meet DARPA’s performance goals and reach the cost goals
of $5,000 per pound of payload with eight first stage vehicles flying 46 times per year for
a total of 363 flights per year. Different economic cases were also evaluated to try and
meet the cost goals in a less ambitious number of flights per year. It was found that if the
DDT&E was paid for by another party (NASA, DOD, etc.) the cost goals can be met with
just three vehicles flying 42 times per year for a total of 125 flights per year.
Sponsor
Date
2004-05-01
Extent
Resource Type
Text
Resource Subtype
Masters Project
Rights Statement
Unless otherwise noted, all materials are protected under U.S. Copyright Law and all rights are reserved