Organizational Unit:

Fusion Research Center

Permanent Link

https://hdl.handle.net/1853/70733

Parent Organization

Organizational Unit

George W. Woodruff School of Mechanical Engineering

ArchiveSpace Name Record

https://finding-aids.library.gatech.edu/agents/corporate_entities/1150

Full item page

Publication Search Results

Now showing 1 - 10 of 15

Non-Diffusive Transport in the Tokamak Edge Pedestal

(Georgia Institute of Technology, 2012) Stacey, Weston M. ; Groebner, Rich J. ; Evans, T. E.

There are (at least) two classical mechanisms for non-diffusive transport in the edge plasma: i) particle “pinch” velocities due to forces such as VxB, and Er; and ii) outward drifts due to ion-orbit loss and X-transport. A theoretical development for the treatment of these non-diffusive transport mechanisms within the context of fluid theory is assembled and applied to several DIII-D discharges in order to investigate the importance of these non-diffusive transport mechanisms in the edge pedestal. Several interesting insights emerge from this investigation.
Force Balance and Ion Particle Transport Differences in High and Low Confinement Tokamak Edge Pedestals

(Georgia Institute of Technology, 2010-11-22) Stacey, Weston M. ; Groebner, Rich J.

The various terms in the radial force balance in the edge plasma are evaluated using experimental data from the low (L) and high (H) confinement phase of a DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharge in order to investigate the differences in the radial force balance among the several electromagnetic and pressure gradient forces in L-mode and H-mode. The roles of cross-field toroidal momentum transport and of a radial pinch velocity in determining different radial particle fluxes in L-mode and H-mode are elucidated
Evolution of the H-mode edge pedestal between ELMs

(Georgia Institute of Technology, 2010-08) Stacey, Weston M. ; Groebner, Rich J.

The evolution of edge pedestal parameters between edge-localized modes (ELMs) is analyzed for an H-mode DIII-D [J Luxon, Nucl. Fusion 42, 612 (2002)] discharge. Experimental data are averaged over the same sub-intervals between successive ELMs to develop data that characterize the evolution of density, temperature, rotation velocities, etc. over the interval between ELMs. These data are interpreted within the context of the constraints imposed by particle, momentum and energy balance, in particular in terms of the pinch-diffusion relation for radial particle flux that is required by momentum balance. It is found that in the edge pedestal there is an increase of both inward (pinch) electromagnetic and outward (diffusive) pressure gradient forces over the inter-ELM interval.
Interpretation of particle pinches and diffusion coefficients in the edge pedestal of DIII-D H-mode plasmas

(Georgia Institute of Technology, 2009-10-15) Stacey, Weston M. ; Groebner, Rich J.

A procedure is described for evaluating particle pinches to be used in interpreting particle diffusion coefficients from measured density and temperature profiles in the edge pedestal of tokamak plasmas. Application to the interpretation of two DIII-D [ J. Luxon, Nucl. Fusion 42, 614 (2002) ]. discharges yields new information about particle pinches and particle diffusion coefficient profiles in the edge pedestal.
Interpretation of edge pedestal rotation measurements in DIII-D

(Georgia Institute of Technology, 2008-01-25) Stacey, Weston M. ; Groebner, Rich J.

A novel methodology for inferring experimental toroidal angular momentum transfer rates from measured toroidal rotation velocities and other measured quantities has been developed and applied to analyze rotation measurements in the DIII-D J. Luxon, Nucl. Fusion 42, 6149 2002 edge pedestal. The experimentally inferred values have been compared with predictions based on atomic physics processes and on neoclassical toroidal viscosity. The poloidal rotation velocities have been calculated from poloidal momentum balance using neoclassical parallel viscosity and a novel retention of all terms in the poloidal momentum balance, and compared with measured values in the DIII-D edge pedestal.
Edge Pedestal Structure and Transport Interpretation in DIII-D (In the absence of or in between ELMs)

(Georgia Institute of Technology, 2008) Stacey, Weston M. ; Groebner, Rich J.
Implementation of the GTNEUT 2D Neutrals Transport Code for Routine DIII-D Analyses

(Georgia Institute of Technology, 2008) Stacey, Weston M. ; Rognlien, Thomas D. ; Groebner, Rich J. ; Friis, Zachary Ward

The Georgia Tech Neutral Transport (GTNEUT) code is being implemented to provide a tool for routine analysis of the effects of neutral atoms on edge phenomena in DIII-D. GTNEUT can use an arbitrarily complex two-dimensional grid to represent the plasma edge geometry. The grid generation capability built into the UEDGE code, which utilizes equilibrium fitting data taken from experiment, is being adapted to produce geometric grids for the complex 2D geometries in the DIII-D plasma edge. The process for using experimental measurements supplemented by plasma edge calculations to provide the required background plasma parameters for the GTNEUT calculation will be systematized once the geometric grid generation is complete.
Experimentally inferred thermal diffusivities in the edge pedestal between edge-localized modes in DIII-D

(Georgia Institute of Technology, 2007-12-11) Stacey, Weston M. ; Groebner, Rich J.

Using temperature and density profiles averaged over the same subinterval of several successive inter-edge-localized-mode (ELM) periods, the ion and electron thermal diffusivities in the edge pedestal were inferred between ELMs for two DIII-D [ J. Luxon, Nucl. Fusion 42, 614 (2002) ] discharges. The inference procedure took into account the effects of plasma reheating and density buildup between ELMs, radiation and atomic physics cooling, neutral beam heating and ion-electron equilibration, and recycling neutral and beam ionization particle sources in determining the conductive heat flux profiles used to infer the thermal diffusivities in the edge pedestal. Comparison of the inferred thermal diffusivities with theoretical formulas based on various transport mechanisms was inconclusive insofar as identifying likely transport mechanisms.
Thermal transport analysis of the edge region in the low and high confinement stages of a DIII-D discharge

(Georgia Institute of Technology, 2007-01-04) Stacey, Weston M. ; Groebner, Rich J.

The ion and electron thermal diffusivities have been inferred from measured density and temperature profiles in the edge of a DIII-D [ J. Luxon, Nucl. Fusion 42, 614 (2002) ] discharge with a low confinement (L-mode) stage followed by a high confinement (H-mode) stage free of edge localized modes. Conductive heat flux profiles used to construct the inferred thermal diffusivities were calculated taking into account heat convection, radiation, atomic physics effects of recycling neutrals, ion-electron equilibration, and neutral beam heating. The inferred thermal diffusivities were compared with theoretical predictions.
Annual Report 2007 Georgia Tech Fusion Research Center

(Georgia Institute of Technology, 2007) Stacey, Weston M. ; Friis, Zachary Ward ; Lao, L. ; Groebner, Rich J.

Contents: A. Interpretation of Edge Pedestal Rotation Measurements in DIII-D -- B. Experimentally Inferred Thermal Diffusivities in the Edge Pedestal Between ELMS in DIII-D -- C. Integrated Core-Pedestal-Divertor-Neutrals Modeling -- D. Ion Particle Transport in the Edge Pedestal -- E. Neutral Transport Analysisof DIII-D Experiments -- F. Sub-Critical Transmutation Reactors with Tokamak Fusion Neutron Sources Based on ITER Physics and Technology.